Amel Super Maramu 2000

Air Conditioning Climma Marine Compact 9

Disconnecting the air duct and cooling hoses of the Aft Climma Marine Compact 9

remove the clamp holding the hose

Removing the hose of the overflow (this was actually quite difficult)

Remove the clip holding the cooling water to the compressor.

I realize how important are these clamp, should there be a failure water would fill up quickly in the boat from the calpeda pump.
They are two clamp and a metallic wire holding the second one

Hose removed

Same on the other side

Hose removed

Next: Part 6 Removing the thermostats and holding brackets

Removal Aft cabin Air Conditioning Climma Marine Compact 9 Part 1 Thermostats and control box removal Part 2 Disconnecting the current and testing voltage Part 3 Disconnecting the Fan and Compressor harnesses Part 4 Disconnecting the Calpeda cooling pump and control harness Part 5 Disconnecting the air duct and cooling hoses Part 6 Removing the thermostats and holding brackets Part 7 Removing the thermostats control   Removal Forward cabin Air Conditioning Part 8 Disconnecting the cooling hoses Part 9 Removal control box Part 10 Capacitor testing Part 11 Disconnecting the Calpeda pump, AC (Alternative Current) wire and control box Part 12 Disconnecting the Compressor and Fan harnesses Part 13 Removing the thermostats and holding brackets   Installation of the Aft cabin Air Conditioning Part 14 Putting back the thermostat and control box Part 15 Changing the air duct direction (to later realize it will not fit) Part 16 Comparing air duct the Aft and Forward cabin

Swapping the fan covers Part 17 Removing the fan of the Aft unit Part 18 Removing the fan of the Forward unit Part 19 Putting back the fan on the new Aft unit   Continue Installation of the Aft cabin Air Conditioning Part 20 Reconnecting the cooling hoses Part 21 Putting back holding brackets, overflow and thermostat Part 22 Looking at the control box Part 23 Reconnecting the Fan harness Part 24 Reconnecting the Compressor harness Part 25 Reconnecting the Calpeda, AC (Alternative Current) and control box Part 26 Reconnecting the Capacitors Part 27 Closing the control box and attach back to wall Swapping the control box and attach of the Aft and forward units Part 28 Swapping the control box and attach of the Aft and forward units   Installation of the Forward cabin Air Conditioning Part 29 Reconnecting the fan assembly Part 30 Attaching holding brackets Part 31 Reconnecting the hoses and Thermostat Part 32 Quick reconnection of the harnesses and Capacitors Part 33 Testing for leaks Part 34 Putting back cover for Aft and Forward units